Product
How to Pick the Right Time Clock: Five Questions to Answer Before You Buy
Most time clock mistakes happen before the box is opened. A clock that works well at a clean front desk can fall apart in its first week at a loading dock, in a commercial kitchen or on a job site: gloves stay on, fingerprints won't read, there's no Wi-Fi, and forty people show up at 6:55. The right clock comes from five questions about where and how your people actually clock in. Answer them for each site, and the choice usually makes itself.
What You Need to Know
Choose for the clock-in spot.
Choose the clock for the place people clock in, not for the office.
Badges and PINs can be shared.
Badges and PINs are fast and cheap but can be shared; biometrics tie each punch to the person.
Gloves rule out fingerprint.
Fingerprint clocks need a bare finger. If gloves stay on, use face recognition or a badge.
Size for the rush.
Size clocks to your busiest shift change, not your headcount.
No power or network? Go portable.
Where there's no fixed spot, power or network, only a portable or mobile clock with its own battery and cellular connection will work.
There is no single best employee time clock. There is the best clock for each entrance where your people start their day, and five questions will get you there.
1. Where Will Most People Clock In?
Picture the spot at 6:55 on a Monday. Is it the front desk of a clinic, a warehouse door with a forklift going past, a yard with no roof, or a different job site every week? That one answer rules out more clocks than any spec sheet.
| Where | What it means for the clock | Usually fits |
|---|---|---|
| Office, clinic or clean indoor space | Anything works; optimize for cost and speed | 200 (optical fingerprint), 50 (badge), F1000 (face) |
| Warehouse, kitchen or factory floor | Dirty or wet hands, more people at once | 500 (multispectral fingerprint), F1000, 50 |
| A fixed but harsh site: yard, plant, dock | Dust, worn hands, sometimes weather | 700 (industrial multispectral fingerprint), mounted under cover |
| A different site each week, or no fixed spot | Needs its own battery and cellular data | P3000 (portable) or M2000 (mobile) |
If you have more than one kind of site, answer the remaining questions for each one. Most multi-site businesses end up with two clock types, not one.
2. How Should People Prove Who They Are?
Every manager who has run a shift has seen it: one person arrives, clocks in two badges, and their friend walks in twenty minutes later. A PIN or badge proves that a PIN or badge was used. A fingerprint or a face proves who was standing at the clock.
Badge or PIN. A PIN time clock or badge time clock is the fastest and cheapest option, and nobody has to enroll anything. The weakness is that a code can be told and a card can be lent. That's fine for a small team you trust, and useful as a backup method on any clock.
Fingerprint. A fingerprint ties the punch to the person at a low cost per clock. It needs a bare finger. The best fingerprint time clock for your site depends on the hands in question 3, not on the brochure.
Face recognition. Touchless, works with gloves on, and the fastest biometric at a busy door. If you're weighing the best biometric time clock for a crowded entrance, start here.
Mixing methods. You don't have to pick one method for everyone. Set it per employee: fingerprint for permanent staff, say, and a badge for temps on their first day before they're enrolled. For a deeper look at the trade-offs, see fingerprint vs face vs RFID compared.
Which employee time tracking systems support PIN, card, and fingerprint clock-in options?
Most modern time and attendance systems support several clock-in methods on the same device, so employees can use a PIN, a badge or card, or a biometric scan depending on the site and role. Look for a fingerprint time clock that also reads RFID or proximity cards and accepts a PIN as a fallback, and software that lets you set the method per employee or location. Multispectral fingerprint sensors suit dirty or worn hands; optical sensors suit clean, indoor sites. EasyClocking's 200, 500 and 700 clocks support fingerprint, card and PIN on one device, and every EasyClocking clock accepts card and PIN.
| Model | Palm | Face | Fingerprint | Card / RFID | PIN | Battery + LTE |
|---|---|---|---|---|---|---|
| P3000 | Yes | Yes | Optical | Yes | Yes | Yes |
| M2000 | No | Yes | No | Yes | Yes | Yes |
| F1000 | No | Yes | No | Yes | Yes | No |
| 700 | No | No | Multispectral | Yes | Yes | No |
| 500 | No | No | Multispectral | Yes | Yes | No |
| 200 | No | No | Optical | Yes | Yes | No |
| 50 | No | No | No | Yes | Yes | No |
Full specs for every model are on the compare EasyClocking time clocks table.
3. What Are Their Hands Like at the Start of a Shift?
Ask a mason, a line cook or a mechanic to clock in on a fingerprint scanner and you'll find out quickly why this question matters. Worn ridges, flour, grease, cuts and cracked skin from sanitizer all get in the way of a standard optical scanner.
Clean hands. An optical fingerprint sensor, like the one in the 200, is fine here and costs the least.
Dirty, wet or worn. Multispectral sensors read beneath the surface of the skin, so they keep working when the surface is a mess. That's why the best fingerprint time clock for a kitchen or a shop floor is a multispectral one, like the 500 or 700. Face recognition works here too.
Gloves or PPE on. Use face or badge. A fingerprint clock means gloves off at every punch, and a line that moves at the speed of the slowest glove.
A mix. A multispectral fingerprint clock with a badge backup covers most crews. Face recognition covers all of them. Our biometric time clock buyer's guide goes deeper on each sensor type.
Rule of thumb: if gloves stay on at clock-in, don't buy a fingerprint clock. Choose face recognition (F1000) or a badge (50).
Already know your answers? Get a recommendation.
4. How Many People Clock In at Once?
Headcount is the wrong number. What matters is how many people reach the clock in the ten minutes before a shift. Forty people at one clock means a line, and a line means late punches, edited timesheets and a supervisor who starts the day fixing records.
Fewer than 25 at once. One clock per entrance, any type.
25 to 100. Use faster methods, such as face recognition or a multispectral fingerprint sensor, or put up two clocks.
More than 100. Plan several clocks, with face or badge at the main entrance, and consider staggered start times.
In large buildings, add a clock near the break room so meal breaks aren't spent walking to the front door and back.
5. What's on the Wall Where the Clock Will Go?
Before the clock comes power and a network. A spot with an Ethernet port can run the clock on one cable. A spot with only an outlet needs good Wi-Fi. A spot with neither, like a trailer on day one of a job, needs a clock that brings its own battery and cellular connection.
Wired network with Power over Ethernet. One cable carries both power and data, so no outlet is needed. The 200, 500, 700 and 50 all run on PoE.
Wi-Fi and an outlet. Most wall clocks work this way. Check the signal at the exact spot where the clock will hang, not at the office router.
No reliable power or network. The P3000 and M2000 run on an all-day battery and 4G LTE.
You need the location of every punch. The P3000 and M2000 log GPS location with each punch, and the EasyClocking mobile app records GPS with geofencing for crews who clock in on their phones.
Whatever the connection, EasyClocking clocks keep storing punches when it drops and upload them once it's back, so a network outage doesn't turn into missing hours.
Five Example Setups and the Clock That Fits
Here's how the five answers play out for a few common businesses. These are illustrations, not customer stories.
| Business | The answers | Clock |
|---|---|---|
| A 12-person dental practice | Clean indoor front desk; trusted team; under 25 at once; Wi-Fi and outlet | 200, or a 50 if nobody wants to enroll fingerprints |
| An 80-person commercial kitchen | Wet, floury hands; punch sharing on weekend shifts; 25 to 100 at once | 500, or an F1000 for touchless clock-in |
| A 300-person plant on two shifts | Factory floor; gloves on; over 100 at the main door; wired network at the entrance | Several F1000s at the main door, 50 badges for temps |
| A roofing contractor with four crews | Different site each week; no power or Wi-Fi; worn hands | One P3000 or M2000 per crew |
| A machine shop with a fenced yard | Fixed harsh site; oily, worn hands; PoE in the shop | 700 at the shop door, under cover |
Two Checks Before You Buy
The time clock features above decide whether punches get captured. Two more checks decide whether those punches turn into a clean payroll and a clean legal file.
Payroll. The clock is only half the job. Check how hours get from the clock to payroll, whether overtime and break rules are applied automatically, and whether your payroll provider is supported. EasyClocking's payroll integrations list the providers it connects to.
Biometric consent. Illinois, Texas and Washington regulate biometric data, and Illinois's BIPA requires written notice and a signed release before you collect fingerprints or face scans. If consent is a barrier, a badge or PIN clock avoids biometric data entirely. Read more about biometric privacy rules. This is general information, not legal advice.
Answer the five questions for each site and you'll have something more useful than a list of the best employee time clocks: the right one for every door your people walk through. For a wider view of what's on the market, see our best time clock for employees FAQ.